Leon Mk2
| Vehicles with particulate filter and front exhaust pipe, in two stages: Assembly overview |
| 1 - | Particle filter |
| q | Removing and installing the particulate filter in vehicles with manual gearbox → Chapter |
| 2 - | Exhaust gas temperature sender 1 -G235-, 45 Nm |
| q | Removing and installing → Chapter |
| q | Apply hot bolt paste to the thread → Spare parts catalogue. |
| 3 - | Turbocharger |
| q | Removing and installing → Chapter |
| 4 - | Lambda probe -G39- with heater for lambda probe -Z19-, 50 Nm |
| q | removing and fitting → Chapter |
| 5 - | Pressure differential sender -G505-, 45 Nm |
| q | removing and fitting → Chapter |
| q | Pressure pipe to particulate filter, 45 Nm |
| q | With bolt, tightening torque 4.5 Nm |
| q | Apply hot bolt paste to the thread → Spare parts catalogue. |
| 6 - | Exhaust gas temperature sender 3 -G495-, 45 Nm |
| q | Removing and installing → Chapter |
| q | Apply hot bolt paste to the thread → Spare parts catalogue. |
| 7 - | Primary exhaust pipe |
| q | removing and fitting → Chapter |
| 8 - | Exhaust gas temperature sender 4 -G648-, 45 Nm |
| q | removing and fitting → Chapter |
| q | Apply hot bolt paste to the thread → Spare parts catalogue. |
