Leon Mk2
Exhaust gas turbocharger : component overview |
1 - | Banjo bolt |
q | 60 Nm |
2 - | O-rings |
q | Renew |
3 - | Bolt |
q | 15 Nm |
4 - | Oil return line |
5 - | Nuts |
q | 20 Nm |
6 - | Heat shield |
7 - | Gasket |
q | Renew |
8 - | Gasket |
q | Renew |
9 - | Pulsation damper |
10 - | Bolt |
q | 10 Nm |
11 - | Bolt |
q | 8 Nm |
12 - | Bracket |
q | For electrical wiring |
13 - | Heat shield |
14 - | Turbocharger |
q | Can only be renewed complete with exhaust manifold and vacuum unit. |
q | Removing and installing → Chapter. |
15 - | Bolt |
q | 9 Nm |
16 - | Oil supply line |
q | Check for continuity. |
q | Before installing, fill turbocharger with engine oil at oil supply line connection. |
q | Tightening union nuts → Item |
17 - | Gasket |
q | Renew |
18 - | Nut |
q | 20 Nm |
19 - | Gasket |
q | Renew |
20 - | Nut |
q | 20 Nm |
21 - | Pipe |
q | To exhaust gas recirculation cooler. |
22 - | Exhaust gas temperature sender 1 -G235- |
q | Removing and installing → Chapter. |
23 - | Bolt |
q | 20 Nm |
24 - | Bracket |
q | For turbocharger. |
25 - | O-rings |
q | Renew |