–
| Carefully pull the fuel level sender 2 -G169-- 2- with the spray jet -1-,removing them a little through the fuel tank opening. |
–
| Unclip the spray jet from the locking flange -arrows-. |
Note On removing the fuel level sender 2 -G169-, make sure you do not bend its floater arm. |
Installation is carried out in the reverse order; note the following: |
Note Upon introducing the fuel level sender 2 -G169-, make sure you do not bend its floater arm. |
–
| Carefully insert the fuel level sender 2 -G169--2- through the opening in the fuel tank. |
–
| Engage the spray jet -1- in the locking flange until hearing it engage. |
|
|
|