SEAT Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Checking fuel gauge sender 2G169 >
< Checking fuel gauge senderG
Leon Mk2
Power unit
4-cylinder engine (2.0l 4V, TDI Common Rail)
Fuel supply, gas operation
Fuel supply, vehicles with four-wheel drive
Removing and installing fuel gauge senderG
Removing and installing fuel gauge senderG
Removing and installing fuel gauge sender -G-
t
Removing
→ Anchor
.
t
Installing
→ Anchor
.
Removing
.
Observe safety precautions
→ Chapter
.
Observe rules for cleanliness
→ Chapter
.
–
Remove fuel delivery unit
→ Chapter
.
–
Push the fuel level sender -G- slightly inwards in the
-direction of the arrow-
and at the same time remove upwards in the
-direction of the arrow-
.
–
Unlock the connector tabs
-1 … 3-
, inserting a fine screwdriver through the holes
-arrows-
and disconnect the connectors.
Installing
.
Install in reverse order to dismantling, noting the following:
Fitting position for fuel level indicator sender -G- cables
I -
Brown Cable
II -
Blue Cable
III -
Black Cable
Note
When mounting the fuel level sender -G- on the supply unit, make sure that the cables are correctly positioned.
–
Insert the fuel gauge sender -G- into the guides on fuel delivery unit and press upwards until it clicks into place.
–
Install fuel delivery unit
→ Chapter
.
Power unit
4-cylinder engine (2.0l 4V, TDI Common Rail)
Fuel supply, gas operation
Fuel supply, vehicles with four-wheel drive
Removing and installing fuel gauge senderG
Checking fuel gauge sender 2G169 >
< Checking fuel gauge senderG