SEAT Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Fuel supply unit and fuel level sender >
< Checking fuel gauge senderG
Leon Mk2
Power unit
4-cylinder engine (2.0l 4V, TDI Common Rail)
Fuel supply, gas operation
Fuel supply, vehicles with front wheel drive
Removing and installing fuel gauge senderG
Removing and installing fuel gauge senderG
Removing and installing fuel gauge sender -G-
t
Removing
→ Anchor
.
t
Installing
→ Anchor
.
Removing
.
Observe safety precautions
→ Chapter
.
Observe rules for cleanliness
→ Chapter
.
–
Remove fuel delivery unit
→ Chapter
.
–
Push the fuel level sender -G- slightly inwards in the
-direction of the arrow-
and at the same time remove upwards in the
-direction of the arrow-
.
–
Unlock the connector tabs
-1 … 3-
, inserting a fine screwdriver through the holes
-arrows-
and disconnect the connectors.
Installing
.
Install in reverse order to dismantling, noting the following:
Fitting position for fuel level indicator sender -G- cables
I -
Brown Cable
II -
Blue Cable
III -
Black Cable
Note
When mounting the fuel level sender -G- on the supply unit, make sure that the cables are correctly positioned.
–
Insert the fuel gauge sender -G- into the guides on fuel delivery unit and press upwards until it clicks into place.
–
Install fuel delivery unit
→ Chapter
.
Power unit
4-cylinder engine (2.0l 4V, TDI Common Rail)
Fuel supply, gas operation
Fuel supply, vehicles with front wheel drive
Removing and installing fuel gauge senderG
Fuel supply unit and fuel level sender >
< Checking fuel gauge senderG