| t
| Vacuum pump -VAS 6213-, see equivalent → Anchor |
| –
| Check all the vacuum lines of the entire vacuum system. When doing so, keep in mind the following: |
| t
| Kinked or crushed lines |
| t
| Lines porous or leaking |
| –
| Check the vacuum hose to solenoid valve and from solenoid valve to relevant component. |
| –
| In the event of an entry in the event memory, check the vacuum lines of the component in question, but also check the other vacuum lines. |
| –
| If no pressure is built up or the pressure falls again immediately when using the vacuum pump -VAS 6213-, ensure that the manual vacuum pump and the coupling hoses are sealed. |
|
|
|
