seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Engine oil > < Exhaust camshaft oil seal: replacing

Leon Mk2

Parts of lubrication system
Parts of lubrication system
  Note
t  Finding metal shavings or a large quantity of small metal particles during engine repair could indicate that the conrod bearings are damaged. To prevent this from causing further damage, perform the following repairs:
t  Thoroughly clean oil channels.
t  Replace oil jets.
t  Replace the oil radiator.
t  Replace the oil filter.
t  The oil level must not be above the max. mark - danger of damaging catalytic converter!
→ Chapter „Engine oil“.
→ Chapter „Lubricating system components - Assembly overview“.
→ Chapter „Oil filter housing:draining“.
→ Chapter „Removing and installing oil sump“.
→ Chapter „Oil pump with rotational balancing unit: removing and fitting“.
→ Chapter „Oil pressure and oil pressure switch: check“.
→ Chapter „Oil cooler: Removing and installing“.
→ Chapter „Oil filter bracket: removing and fitting“.
   

Engine oil > < Exhaust camshaft oil seal: replacing