Leon Mk2
| Fuel rail with injectors - Assembly overview |
| 1 - | Supply pipe |
| q | Check for secure seating. |
| q | Lock using elastic spring type clips |
| q | From fuel filter |
| 2 - | 7 Nm |
| 3 - | Securing clip |
| q | Note type |
| 4 - | Cable guide |
| q | Clipped over fuel rail |
| 5 - | Fuel rail |
| 6 - | Bleed valve |
| q | For fuel system |
| q | Bleed air from fuel system → Chapter |
| 7 - | Protection hood |
| q | For bleed valve |
| 8 - | Clip |
| q | Check that it is properly fitted in the injector |
| 9 - | O-ring |
| q | Renew |
| q | Before installing moisten with clean engine oil |
| 10 - | Cylinder injector 4 -N33- |
| q | Cylinder injector 1 -N30- |
| q | Cylinder injector 2 -N31- |
| q | Cylinder injector 3 -N32- |
| q | Removing and installing → Chapter |
