Leon Mk2
| Fuel tank and accessory parts - Assembly overview |
| 1 - | Fuel filter: |
| q | The flow direction is marked by arrows |
| q | Do not interchange the connections |
| q | Removing and fitting → Chapter |
| q | Assembly position: The filter housing pin must fit into the guide cut-out on the bracket guide → Fig. |
| 2 - | Clip |
| q | To fuel pressure regulator |
| q | Check for secure seating. |
| 3 - | Fuel supply line |
| q | Black colour |
| q | From the fuel tank |
| q | To remove, press the release tabs. |
| 4 - | Fuel return line |
| q | Blue colour |
| q | To fuel tank |
| q | To remove, press the release tabs. |
| 5 - | Fuel pressure regulator |
| q | 4 bar |
| q | check → Chapter |
| 6 - | Seal |
| q | Replace. |
| 7 - | O-ring |
| q | Replace. |
| 8 - | Fuel supply line |
| q | Black colour |
| q | To engine |
| q | To remove, press the release tabs. |
| 9 - | 3 Nm |
| 10 - | Bracket |
| q | For fuel filter |
| q | Fitted on fuel tank |
