| To prevent injuries to persons and/or serious damage to the fuel injection and ignition system, the following must be noted: |
| t
| Do not touch or remove the ignition cables with the engine running or idling. |
| t
| The ignition must be switched off before connecting or disconnecting injection or ignition system wiring or tester cables. |
| If in the test drives it is necessary to use the tester units, take note of the following: |
| t
| Testers and measuring instruments must always be secured to the rear seat and operated by a second person from this location. |
| If test and measuring instruments are operated from front passenger's seat and the vehicle is involved in an accident, there is a possibility that the person sitting in this seat may receive serious injuries when the airbag is triggered. |
| If the engine is to be turned at starter speed without starting: |
Note | When removing the fuses, the power supply of the injectors and the ignition coils is interrupted. |
| After deleting the fault memory, the conformance code must be generated. |
|
|
|
