Leon Mk2
| Fuel rail with injectors - Assembly overview |
| 1 - | Supply pipe |
| q | Check for secure seating. |
| q | Immobilise with spring clips |
| q | From the fuel filter |
| 2 - | 7 Nm |
| 3 - | Securing clip |
| q | Note type |
| 4 - | Cableguide |
| q | Clipped over fuel rail |
| 5 - | Fuel rail |
| 6 - | Bleed valve |
| q | For fuel system |
| q | Bleed air from fuel system → Chapter |
| 7 - | Closing cap |
| q | For switching valve |
| 8 - | Clip |
| q | Check that it is properly fitted in the injector |
| 9 - | O-ring |
| q | Replace. |
| q | Before installing moisten with clean engine oil |
| 10 - | Cylinder 4 injector -N33- |
| q | Cylinder 1 injector -N30- |
| q | Cylinder 2 injector -N31- |
| q | Cylinder 3 injector -N32- |
| q | Removing and fitting → Chapter |
