seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Renewing valve stem seals|Fitting > < Renewing valve stem seals

Leon Mk2

Removing
Removing
(with cylinder head in place)
–  Remove camshaft housing → Chapter.
–  Remove roller rocker fingers and place onto a clean surface. When doing this, ensure that the roller rocker fingers are not interchanged.
–  Remove spark plugs using spark plug socket and extension -3122 B-.
–  Set piston of respective cylinder to „bottom dead centre“.
   
–  Attach valve spring tool -3362- with thrust piece -3362/1-.
–  Screw pressure hose -VW 653/3- into spark plug thread.
–  Connect pressure hose to a compressed air system of at least 6 bar of compressed air and remove valve springs.
–  Pull off valve stem seals using valve stem seal puller -3364-.
  N15-0081

Renewing valve stem seals|Fitting > < Renewing valve stem seals