Leon Mk2
Assembly overview - fuel delivery unit, fuel gauge sender and suction jet pump |
1 - | Fuel line |
q | For metering pump -V54- |
2 - | Fuel return line |
q | Blue |
q | From the fuel filter |
q | Check for secure seating. |
3 - | Fuel supply line |
q | Black colour |
q | Check for secure seating. |
4 - | Connector |
q | For fuel delivery unit |
5 - | Connector |
q | For fuel gauge sender -G- |
6 - | Locking ring, 145 Nm |
q | Remove and install using wrench -T10202-. |
q | Check for secure seating. |
7 - | Flange |
q | For fuel delivery unit |
q | For fuel gauge sender -G- |
q | Always renew flange seal |
q | Note installation position on fuel tank → Fig.. |
8 - | Suction hose |
q | With suction-jet pump |
q | Clipped onto fuel tank. |
q | removing and installing → Chapter |
9 - | Fuel delivery unit |
q | removing and installing → Chapter |
q | Note installation position on fuel tank → Fig.. |
q | With fuel gauge sender -G-. |
q | Clean strainer if soiled. |
10 - | Oil seal |
q | replace |
q | When installing, fit dry in fuel tank opening. |
q | Moisten with fuel only when installing flange. |
11 - | Fuel gauge senders -G- |
q | Removing and installing fuel gauge sender -G- → Chapter. |