seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Repairs to the fuel supply system > < Removing and installing fuel tank

Leon Mk2

Removing and installing fuel filter
Removing and installing fuel filter
Special tools and workshop equipment required
t  Drip tray
Removing
  Note
t  Note safety precautions before starting work → Chapter.
t  Observe rules for cleanliness → Chapter.
–  Place drip tray under fuel filter.
  WARNING
Fuel system is under pressure! Wear eye protection and protective clothing to avoid possible injury and skin contact. Before loosening hose connections, wrap a cloth around the connection. Then release pressure by carefully pulling hose off connection.
   
–  Pull off fuel lines -1-, -2- and -3- by pressing release button.
–  Remove bolt -4-.
–  Take fuel filter off.
Fitting
Installation is carried out in the reverse order. When installing, note the following:
Flow direction is marked with arrows on filter housing.
  A20-1082
Installation position
Pin -2- on filter housing must engage in notch of guide -1- in filter bracket.
Tightening torque:
  A20-1133
ComponentNm
Retaining clamp for fuel filter3

   

Repairs to the fuel supply system > < Removing and installing fuel tank