| Exhaust system: stripping and fitting |
Note | t
| Always replace gaskets and self-locking nuts. |
| t
| After fitting work on the exhaust system, special care must be taken that there are no strains and that there is sufficient separation from the body. If necessary, loosen double and single clamps and align silencer and exhaust pipe so that sufficient clearance is maintained to the bodywork and the supports are evenly loaded. |
| t
| Note the fitting locations and exhaust system installation dimensions. |
| t
| The articulated length in front exhaust pipe must not be bent more than 10° - damage can otherwise occur. |
| t
| If harsh noises are heard after fitting the exhaust system, adjust the engine mountings. |
|
|
|
