Leon Mk2
Fuel rail with injectors - Assembly overview |
1 - | Fuel rail |
2 - | Cable guide |
3 - | Clip |
q | Check for firm attachment |
4 - | Injectors N30 ... N33 |
q | Cylinder injector 1 -N30- |
q | Cylinder injector 2 -N31- |
q | Cylinder injector 3 -N32- |
q | Cylinder injector 4 -N33- |
q | Removing and installing → Chapter |
q | Injector seal and injection quantity: checking → Chapter |
5 - | O-ring |
q | Replace |
q | Apply clean engine oil before fitting |
6 - | 8 Nm |
7 - | Intake manifold |
q | Lower part |
q | Separate the upper part of the inlet manifold for removal → Chapter. |
8 - | O-ring |
q | Replace if damaged |
9 - | 20 Nm |
10 - | Sealing gasket |
q | Between the upper and lower part of the inlet manifold. |
q | Note fitting position |
q | Replace if damaged |
11 - | 20 Nm |
12 - | Mounting |