Leon Mk2
Parts of cooling system - body side, engine code AWC |
1 - | Rubber grommet |
2 - | Radiator |
q | Removing and installing → Chapter. |
q | After renewing, renew entire coolant. |
3 - | 10 Nm |
4 - | Radiator fan thermal switch -F18-, 35 Nm |
q | Switching temperatures: |
1st stage on 92...97 °C, off 84...91 °C |
2nd stage on 99...105 °C, off 91...98 °C |
5 - | Connector |
q | Black, 3-pin |
q | For thermal switch for radiator fan. |
6 - | Rubber bush |
7 - | Bracket |
q | For charge air cooler |
8 - | Cowling |
9 - | 9 Nm |
10 - | Right radiator fan -V35- |
q | With fan ring. |
q | Only vehicles with optional equipment. |
q | Removing and installing → Chapter. |
11 - | Bracket |
q | For lower coolant hose. |
12 - | Left radiator fan -V7- |
q | With fan ring. |
q | Removing and installing → Chapter. |
13 - | Connector |
q | Black, 2-pin. |
q | For radiator fan. |
14 - | Charge air cooler |
q | Removing and installing → Chapter. |
15 - | Lower coolant hose |
q | Check for secure seating. |
q | Coolant hose schematic diagram → Chapter. |
16 - | Quick release coupling |
q | With retaining clip. |
q | Check for secure seating. |
17 - | O-ring |
q | Renew if damaged. |
18 - | Upper coolant hose |
q | Check for secure seating. |
q | Coolant hose schematic diagram → Chapter. |