seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Poly-V belt: removing and fitting|Fitting > < Poly-V belt: removing and fitting

Leon Mk2

Removing
Removing
  Note!
If the belt is to be reused, before removal, mark on it the rotation direction, this mark should be observed for fitting.
Versions with tensioning pulley for Poly-V
   
–  Position the -U-40010- tool on the Poly-V belt tensioning pulley.
–  Release the belt tension by pressing on the tool -arrow-.
–  Remove the Poly-V belt from its position on the alternator pulley.
Versions without tensioning pulley and air conditioning
–  Unscrew at least by one full turn, the alternator attachment bolts.
  E13-0234
–  Connect the -U-40050- tool, and with the help of a wrench, put pressure on the tool until the tensioning spring gives.
–  Once tension has been released, remove the Poly-V belt from its engine attachment (it is recommended to first separate the belt from the pulley of the coolant pump).
Continued for all vehicles
–  Removing the sound proofing tray: → Rep. Gr.50.
–  Remove the trapezoidal belt from the power steering hydraulic pump: → Rep. Gr.48.
–  Remove the Poly-V belt.
  E13-0064

Poly-V belt: removing and fitting|Fitting > < Poly-V belt: removing and fitting