Leon Mk2
Cooling system components, body side |
1 - | Radiator |
q | Removing and installing → Chapter |
q | After replacing, renew all coolant |
2 - | O-ring |
q | Renew |
3 - | Upper coolant hose |
q | Secured to radiator with retaining clip |
q | Coolant hose connection diagram → Chapter |
4 - | Cap |
q | Check with cooling system tester -V.A.G 1274- and adapter -V.A.G 1274/9- → Chapter |
q | Test pressure 1.4...1.6 bar |
5 - | Connector |
6 - | Double bolt |
q | 10 Nm |
7 - | Air duct |
8 - | 5 Nm |
9 - | 5 Nm |
10 - | Expansion tank |
q | Carry out leak test of cooling system with cooling system tester -V.A.G 1274- and adapter -V.A.G 1274/8- |
q | Observe markings → Chapter, Coolant: draining and filling |
11 - | Securing clip |
q | For fan cable |
q | Check for secure seating |
12 - | Additional fan |
q | Only vehicles with optional equipment |
13 - | Fan screen |
14 - | Radiator fan |
15 - | Lower coolant hose |
q | Secured to radiator with retaining clip |
q | Coolant hose connection diagram → Chapter |
16 - | Support |
q | To connect to fan terminal |
17 - | Termoswitch -F18- |
q | 35 Nm |
q | For electric fan |
q | Switching temperatures: 1atspeed on: 92...97 °C off: 84...91 °C 2atspeed on: 99...105 °C off: 91...98 °C |
18 - | Lower radiator support |
q | For radiator |
q | Note the fitting position. |
q | Note that there are different versions |
19 - | 5 Nm |
20 - | Upper radiator support |
q | For radiator |
q | Note the fitting position. |
q | Note that there are different versions |