SEAT Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Sump: removing and installing|Installation >
< Sump: removing and installing
Leon Mk2
Power unit
4 cyl. diesel engine with distributor pump
Engine lubrication / Lubrication system components: removing and installing / mp_removing_and_installing/">Sump: removing and installing
Dismantling
Dismantling
Dismantling
–
Remove lower engine protection.
→ General body repairs-assembly work; Rep. Gr.50
–
Drain engine oil.
Note!
Observe disposal regulations!
–
Remove sump.
–
Loosen the sump by gently tapping it with a rubber hammer.
–
Remove sealant residue on cylinder block with a flat scraper.
–
Remove sealant residue on the sump with a rotating brush, e.g. a hand drill with a plastic brush (wear protective goggles).
–
Clean sealing surface, must be free of oil and grease.
Power unit
4 cyl. diesel engine with distributor pump
Engine lubrication / Lubrication system components: removing and installing / mp_removing_and_installing/">Sump: removing and installing
Dismantling
Sump: removing and installing|Installation >
< Sump: removing and installing