seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Identification of the cylinder head gasket > < Position of piston at TDC: checking

Leon Mk2

Checking process
Checking process
   
On fitting new pistons or on a lightened engine, piston position at TDC must be checked. Depending on the projection of the pistons, the cylinder head gasket must be chosen according to the following table:
  Note!
To measure piston at TDC, turn engine clockwise.
  E13-0026
Piston projectionIdentification
Grooves/holes
0.91 mm. 1.00 mm1
1.01 mm. 1.10 mm2
1.11 mm. 1.20 mm3

   

Identification of the cylinder head gasket > < Position of piston at TDC: checking