seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Catalyst: testing > < ont exhaust pipe with catalyst: replacing

Leon Mk2

Silencer with fasteners
   
Silencer with fasteners
1 - Front exhaust pipe with catalyst
2 - Mark
q   Visible from below
3 - Double clamp
q   Check the fitting position
4 - Dimension -a- = approx. 5 mm
5 - Bolt with flat round head
6 - 40 Nm
7 - Presilencer → Note
8 - Suspension element
9 - 25 Nm
10 - Fastener
q   Replace if worn
11 - Union brace
12 - 25 Nm
13 - 25 Nm
14 - Rear silencer → Note
15 - Mark
q   Visible from below
q   For double repair clamp, → Item
16 - Double repair clamp
q   Must be fitted until the marks, → Item
17 - Cutting point
q   In the event of a reparation → Note
q   With three marks on the perimeter of the connecting pipe

1)  On the standard version, the presilencer and rear silencer form a single part. In the event of reparation the presilencer and the rear silencer are supplied separately, with a double clamp, → Item. Cut the connecting pipe perpendicularly at the cutting point, → Item, with the -U-40075-
   

Catalyst: testing > < ont exhaust pipe with catalyst: replacing