SEAT Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Poly-V belt routing >
< Engines with tensioning roller
Leon Mk2
Power unit
4 cyl. injection motor (push rods), mechanics
Enginecrankshaft group, pistons / Engine: disassembly and assembly / ly-v_belt_removing_and_installing/">Poly-V belt: Removing and installing
Install
Install
Install
Note!
t
Poly-V belt routing
→ Item
.
t
Before removing the Poly-V belt, mark its turning direction. When fitting the belt, make sure it lies on the pulleys.
t
Check for correct operation of the tenioning and idle rollers, and that they turn freely.
–
Relieve Poly-V belt tension using the wrench to turn the tensioning roller in the direction shown
-arrow B-
.
Note!
t
Pay special attention while relieving tension so as not to damage the radiator.
t
Turn the tensioning roller just enough to be able to remove the belt Poly-V.
–
Place the Poly-V belt on all the pulleys and finally on the tensioning roller.
–
Remove the fixed spanner and start the engine, check that the Poly-V belt functions properly.
Power unit
4 cyl. injection motor (push rods), mechanics
Enginecrankshaft group, pistons / Engine: disassembly and assembly / ly-v_belt_removing_and_installing/">Poly-V belt: Removing and installing
Install
Poly-V belt routing >
< Engines with tensioning roller