seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Fuel supply unit: removing and installing|Install > < Fuel supply unit: removing and installing

Leon Mk2

Remove
Remove
–  Observe safety measures before beginning assembly work → Chapter.
–  With the ignition switched off, disconnect the battery's earth strap.
–  Tilt the rear seat forward.
–  Remove the fuel supply unit's cover.
  Caution
The fuel system is under pressure. Before opening the system, place a cloth around the connecting joints. Next, bleed the pressure by carefully loosening the connection.
   
–  Remove from the clamp: the connector -1-, as well as the supply -3- and return -2- hoses.
  Note!
To do so, the press the connection keys on the hoses.
–  Unscrew the connection-nut using special tool -U-40055 A-.
–  Withdraw the fuel supply unit and the retainer through the opening in the fuel tank.
  Note!
In case of renewal, empty the old unit before discarding it.
  N20-0245

Fuel supply unit: removing and installing|Install > < Fuel supply unit: removing and installing