Leon Mk2
| Injection system: repair |
| Location of the components |
| 1 - | Electrovalve 1 for the activated carbon tank -N80- |
| q | Activated carbon tank system: → Chapter |
| 2 - | Air filter |
| q | Disassembling and assembling → Chapter |
| 3 - | 4 contact connector |
| q | For Lambda probe and Lambda probe heating |
| 4 - | Butterfly valve control unit -J338- |
| 5 - | Simos -J361- control unit for injection and ignition system |
| 6 - | Intake manifold pressure transmitter -G71- with intake air temperature transmitter -G42- |
| 7 - | Fuel distributor with injectors |
| q | Disassembling and assembling → Chapter |
| 8 - | Lambda probe -G39-, 50 Nm |
| q | Location: in the front exhaust pipe |
| q | Only grease the threads with -G 052 112 A3-. -G 052 112 A3- must not reach the groove in the body of the probe |
| q | Remove and install with special tool -U-40080- |
| 9 - | Pinking sensor 1 -G61- |
| q | With thermal protection shield → Item |
| 10 - | Engine speed sensor -G628- |
| q | Location: clutch housing, upper part |
| 11 - | Coolant liquid temperature transmitter -G28- |
| q | With transmitter for coolant liquid temperature indicator -G2- |
| 12 - | Igition transformer -N152- |
| 13 - | Fuel pressure regulator |
| 14 - | Activated carbon tank |
| q | Activatd carbon tank system: → Chapter |
