| Cylinder head: removing and installing |
Note | t
| When installing an exchange cylinder head, all the contact surfaces between the support elements, roller rocker fingers and cams must be oiled before installing the camshaft housing. |
| t
| The plastic packing pieces for protecting open valves must not be removed until immediately before fitting the cylinder head. |
| t
| After replacing the cylinder head, all coolant must be changed. |
| t
| Oil the support and slide surfaces before carrying out assembly work. |
| t
| Removing and installing the intake manifold and the injectors → Chapter, Injection system - components overview |
| t
| Cylinder head - component overview → Chapter |
| t
| Camshaft housing removing and installing → Chapter |
| t
| Cylinder head: removing and installing → Chapter |
|
|
|
