–
| Remove engine protection together with air filter -arrows-. |
–
| Separate exhaust breather pipe from engine. |
–
| Remove bolts securing upper element to lower element of air filter and remove filter cartridge. |
–
| Installation of the air filter is carried out in the reverse order to removal, observing the following: |
Note t
| Self-threading bolts are used during manufacture to secure the upper element of the air filter to the lower element. When these screws are loosened or tightened using a power tool the threads in the lower or upper part of the air cleaner may be damaged. Therefore, the use of an electric/pneumatic screwdriver to loosen or tighten the bolts is only acceptable if the following conditions are respected: |
t
| maximum revolutions of screwdriver, 200/min. |
t
| maximum tightening torque 3 Nm. |
|
|
|