Leon Mk2
Coolant lines, coolant temperature senders, coolant circulation pump: Assembly overview |
1 - | Bolt. |
q | 9 Nm |
2 - | Install coolant pipe (top). |
q | Removing and installing → Chapter. |
q | Fit coolant hoses → Fig.. |
3 - | O ring |
q | Replace |
4 - | Coolant thermostat: |
q | For exhaust gas recirculation cooler |
5 - | Coolant pipe (rear right) |
q | Removing and installing → Chapter. |
6 - | Bolt. |
q | 9 Nm |
7 - | Nut |
q | 9 Nm |
8 - | Retaining clip |
9 - | Coolant temperature sender -G62- |
q | Removing and installing → Chapter. |
10 - | O ring |
q | Replace |
11 - | Seal |
q | Replace |
12 - | Bolt. |
q | 9 Nm |
13 - | Joint mouth |
q | For coolant hoses |
14 - | Radiator outlet coolant temperature sender -G83- |
q | Removing and installing → Chapter. |
q | 2 Nm |
15 - | O-ring |
q | Different diameters |
q | Replace |
16 - | Nut |
q | 9 Nm |
17 - | Rear coolant pipe |
q | Removing and installing → Chapter. |
18 - | Bolt. |
q | 9 Nm |
19 - | Bolt. |
q | 9 Nm |
20 - | Bolt. |
q | 9 Nm |
21 - | Upper coolant pipe |
q | Removing and installing → Chapter. |
q | Fit coolant hoses → Fig.. |