Leon Mk2
Exhaust system in vehicles with manual gearbox: Assembly overview |
1 - | 23 Nm. |
q | Replace |
q | Lubricate the thread with hot thread compound; hot screw paste → Spare parts catalogue |
2 - | Turbo |
3 - | Seal |
q | Replace |
4 - | Front exhaust pipe with particulate filter: |
q | With catalytic converter |
q | With flexible joint; do not bend flexible joint more than 10° – otherwise it can be damaged |
q | Protect against knocks and impact |
q | with pressure line for the pressure differential sender -G505- |
q | Removing and installing the particulate filter in vehicles with manual gearbox → Chapter |
q | Align exhaust system free of stress → Chapter. |
q | Hanging parts → Fig. |
q | After replacing, perform adaptation in operating mode „Guided functions“ → Vehicle diagnostic tester. |
5 - | Clamp |
q | Align exhaust system when it is cold so it is free of stress before tightening → Chapter |
q | Fitting location → Fig. |
q | Tighten bolt connections evenly |
6 - | 23 Nm. |
7 - | Secondary silencer |
q | Align exhaust system so it is free of stress → Chapter. |
8 - | Holder |
q | Replace if damaged |
q | Check preload → Chapter „Exhaust system: install without stress“ |
9 - | 20 Nm. |
10 - | Holder |
q | Replace if damaged |
11 - | Suspension |
q | Replace if damaged |
q | Check preload → Chapter „Exhaust system: install without stress“ |
12 - | 23 Nm. |
|
|