| Installation instructions, charge air pipes |
Note | t
| The supercharger air system should not leak |
| t
| The flexible hose sleeves and the other turbocharger air system hoses must be free from oil and grease before the assembly. |
| t
| Apply a lubricant for rubbers free from silicone and oil on the leaking surface and on the joint ring. Do not use lubricant products containing silicone or oil. |
| t
| Observe the correct installation position of the hose connections of the charged-air system in order to enable the markings to be aligned correctly. |
| t
| Secure all hose connections with the correct hose clips (same as original equipment) → Parts catalogue. |
| t
| To fix the turbocharger hoses to their connection sleeves safely, if already used clamps are used, their bolt threads should be sprayed with an anti-corrosion spray before the assembly. |
|
|
|
