seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Removing and installing air mass meterG70 > < Removing and installing air cleaner (bottom section)

Leon Mk2

Removing and installing air filter housing
Removing and installing air filter housing
t  Removing → Anchor
t  Fitting → Anchor
   
Removing
–  Remove engine cover panel -arrows-.
  E10-10127
–  Remove bolts -arrows-.
–  Remove air ducts -1- and -2-.
  A10-0746
–  Unplug connector -1- from air mass meter -G70-.
–  Loosen hose clip -2- of the air intake hose going to the exhaust turbocharger and separate the hose from the air mass gauge -G70-.
–  Disconnect expansion clip -arrow- → Item
–  Release retainer for bottom section of air cleaner housing (press in rubber on left and right side and pull upwards).
Installing
To ensure the proper function of the air mass meter -G70- it is important to observe the following instructions.
  Note
Secure all hose unions with hose clamps the same as those of the series → Spare parts catalogue.
  A10-1121

Removing and installing air mass meterG70 > < Removing and installing air cleaner (bottom section)