seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Engine: removing > < Engine: Removing and installing

Leon Mk2

Engine cover: Removing and installing
Engine cover: Removing and installing
t  Engine cover: Removing → Anchor
t  Engine cover: Installing → Anchor.
Removing .
  Caution
If the removal is not carried out correctly, the brackets of the engine cover on the cover of the roller rocker fingers may break. Always remove engine cover according to following instructions.
   
–  Pull engine cover upwards out of fasteners in areas of -arrows- and in sequence shown. To do this, grip as far beneath engine cover as possible.
Fitting .
  Caution
Ensure that the 4 fasteners (ball sockets) are correctly positioned before installing the engine cover panel; if necessary, bring them into correct position. Otherwise the engine cover panel may be damaged.
  E10-10085
–  If necessary, press ball sockets of engine cover panel into correct position.
–  First fit engine cover panel onto mounting points, then press into fasteners at corners.
  N10-10274

Engine: removing > < Engine: Removing and installing