SEAT Workshop Service and Repair Manuals

Engine from manual gearbox: Separate Consult the equivalence table for tools and equipment according to applicability among Seat / VW / Audi / Skoda → Chapter.

Special tools and workshop equipment required

t	Additional hook -10 - 222 A /2-, see equivalent → Anchor

t	Workshop crane -VAS 6100-, see equivalent → Anchor

t	Lifting tackle -T40013-, see equivalent → Anchor

Operation process l  Engine/gearbox assembly removed and attached to engine bracket -T10012-. –  Unscrew bolts -arrows- and remove gearbox support.

–  Unscrew bolts -1- and -2- and take starter off gearbox.

Vehicles with four-wheel drive: –  Unscrew bolts -arrows 2, 3- for bevel box bracket.   Note The -arrows 1- can be disregarded.

Continuation for all vehicles: –  Attach lifting tackle -T40013- to gearbox and close lock. –  Attach workshop crane -VAS 6100- with hooks -10 - 222 A /2- to lifting tackle.

–  Remove bolts -1, 2, 5, 6, 7, 8- securing gearbox to engine.   Note Ignore items -3, 4- and -A-. –  Pull gearbox off engine.