| Checking hydraulic compensation elements |
Note | t
| The hydraulic compensation elements cannot be repaired. |
| t
| Irregular valve noise during starting is normal. |
| Special tools and workshop equipment required |
| –
| Start engine and run until the radiator fan has switched on once. |
| –
| Increase engine speed to about 2500 rpm for 2 minutes; perform road test if necessary. |
Note | If the irregular valve noises stop but recur repeatedly during short journeys, the oil retention valve must be renewed. The oil retention valve is located in the oil filter bracket → Chapter. |
| –
| If the hydraulic compensation elements are still noisy, find out which is the defective compensation element as follows: |
| –
| Turn crankshaft by the bolt for the toothed belt wheel until cam of supporting element to be tested is facing upwards. |
|
|
|
