seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Removing and installing oil sump > < Assembly overview - oil pump, sump, balancer shaft module

Leon Mk2

Removing and installing oil level and oil temperature senderG266
Removing and installing oil level and oil temperature sender -G266-
   
Removing
–  Drain engine oil → Booklet701.
–  Disconnect electrical connector -3-.
–  Unscrew bolts -1- and remove oil level and oil temperature sender -G266--item 4-.
Installing
l  Specified torque → Chapter „Assembly overview - oil pump, sump, balancer shaft module“.
Installation is carried out in the reverse order; note the following:
  Note
Renew seal -2- and self-locking bolts -1-.
–  Replenish engine oil and check oil level → Booklet701.
  A17-0294

Removing and installing oil sump > < Assembly overview - oil pump, sump, balancer shaft module