seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Fuel tank with accessory parts: Assembly overview > < Emptying fuel tank if it is less than 3/4 full

Leon Mk2

Fuel supply, vehicles with front wheel drive
Fuel supply, vehicles with front wheel drive
t  → Chapter „Fuel tank with accessory parts: Assembly overview“.
t  → Chapter „Fuel tank with accessory parts: Removing and installing“.
t  → Chapter „Fuel pre-supply pump -G6- and the fuel level gauge sender -G-: Assembly overview“.
t  → Chapter „Fuel system pressurisation pump -G6-: Electric operation test“.
t  → Chapter „Fuel delivery unit: Removing and installing“.
t  → Chapter „Fuel gauge senders -G-: Check“.
t  → Chapter „Fuel gauge senders -G-: Removing and installing“.
  Note
t  Secure all screw joints with serial hose clips → Parts catalogue.
t  Always replace the O-rings and the gaskets during fitting work.
  WARNING
t  The fuel system is pressurised. Before opening the system place a cloth around the connection. Then release pressure by carefully loosening the connection.
t  The temperature of the fuel lines or the fuel may reach up to 100 ºC in extreme cases. Before opening the duct connections, allow the fuel to cool otherwise there is a risk of severe burns.
t  Wear protective gloves.
t  Wear eye protection.
   

Fuel tank with accessory parts: Assembly overview > < Emptying fuel tank if it is less than 3/4 full