| VW / AUDI tools (that are used in this instruction) | SEAT tool (equivalent) |
| Assembly tool - 10-203- | Guide sleeve -T20081B-. See image of the tool or equipment → Chapter |
| Support bracket -10-222 A- | Support -U 30025F-. See image of the tool or equipment → Chapter |
| Measuring bridge -382/7- and Final level plate -385/17- | Support -T20026-. See image of the tool or equipment → Chapter |
| Coupling tool -3033- | Support tool -T20127-. See image of the tool or equipment → Chapter |
| Counterhold tool -3067- | Retention tool -T20176- see image for tool or unit → Chapter |
| Counterhold tool -3094- | Push rod -U 30042- See image of the tool or equipment → Chapter |
| Special wrench -3185- | No equivalent |
| Seal extractor -3203- | Extraction lever -T20143-. See image of the tool or equipment → Chapter |
| Jointed spanner -3220- | No equivalent |
| Seal extractor -3240- | Extraction lever -T20143-. See image of the tool or equipment → Chapter |
| Socket SW 8 -3247- | No equivalent |
| Pincers -3314- | Pliers -T20011-. See image of the tool or equipment → Chapter |
| Locking tool -3359- | Counterhold -T20102- . See image of the tool or equipment → Chapter |
| Extractor -3364- | Puller -T20058A-. See image of the tool or equipment → Chapter |
| Press tool -3365- | Clamping tool -T20039-. See image of the tool or equipment → Chapter |
| Counterhold tool -3415- | Retention tool -T20018B- see image for tool or unit → Chapter |
| Lever -80 200- | Lever -T20043- See image of the tool or equipment → Chapter |
| Measuring tool -T10007A- | No equivalent |
| attachment tool -T10038- | No equivalent |
| Counterhold tool -T10050- | No equivalent |
| Counterhold tool -T10051- | No equivalent |
| Puller -T10052A- | No equivalent |
| Installation tool -T10053- | Guide sleeve -T20081B-. See image of the tool or equipment → Chapter |
| Adapter -T10055/3- | Adapter -T10055A/1- see image for tool or unit → Chapter |
| Extractor -T10055- | Puller -T10055A-. See image of the tool or equipment → Chapter |
| Special wrench -T10058- | Wrench -T20203- See image of the tool or equipment → Chapter |
| Pin -T10060 A- | Support tool -T20167- see image of the tool or equipment → Chapter |
| Locating pins -T10096- | Centring pin -T20150-. See image of the tool or equipment → Chapter |
| attachment tool -T10134- | No equivalent |
| attachment tool -T10172- | Retention tool -T20018B- see image for tool or unit → Chapter |
| Wrench -T10202- | No equivalent |
| Press tool -T10238- | No equivalent |
| Press tool -T10240- | No equivalent |
| Counterhold tool -T10255- | No equivalent |
| Special wrench, long reach -T10264- | No equivalent |
| Locking tool -T10265- | No equivalent |
| Assembly sleeve -T10377- | No equivalent |
| Bit XZN 10 -T10385- | Socket wrench XZN M10 long -SAT 1006/2 10L- see image for tool or unit → Chapter |
| attachment tool -T10404- | No equivalent |
| Support clamp -T40013- | Support tool -T20186-. See image of the tool or equipment → Chapter |
| Socket -T40055- | No equivalent |
| Extractor -T40064- | No equivalent |
| pressure tool -T40064/1- | No equivalent |
| Camshaft fitting tool -T40094- | No equivalent |
| Camshaft clamping tool -T40095- | No equivalent |
| Camshaft fitting tool -T40096- | No equivalent |
| Pressure tester -VAG 1274B- | Cooling system tester -SAT 1274- see image of the tool or equipment → Chapter |
| Adapter -VAG 1274/8- | No equivalent |
| Adapter -VAG 1274/9- | No equivalent |
| Pressure tester -VAG 1318- | No equivalent |
| Torque wrench (5…50 Nm) -V.A.G 1331- | Torque wrench kit -SAT 8010- See image of the tool or equipment → Chapter |
| Ratchet 1/2' x 9-12 -V.A.G 1331/1- | No equivalent |
| Insert e/c 17 -V.A.G 1331/6- | Open support 17 -SAT 8010/17A-. See image of the tool or equipment → Chapter |
| Torque wrench (40 - 200 Nm) -V.A.G 1332- | Torque wrench kit -SAT 8010- See image of the tool or equipment → Chapter |
| Insert e/c 24 -V.A.G 1332/11- | Wrench -SAT 8010/24C- See image of the tool or equipment → Chapter |
| Oil pressure tester -VAG 1342- | No equivalent |
| Remote control -V.A.G 1348/3 A- with adapter wire -V.A.G 1348/3-3- | No equivalent |
| Engine and gearbox crane -V.A.G 1383 A- | Hydraulic jack for engine and gearbox -SAT 1040- See image of the tool or equipment → Chapter |
| Multimeter -VAG 1526E- | No equivalent |
| Voltage tester -VAG 1527B- | No equivalent |
| Auxiliary cable kit -VAG 1594C- | No equivalent |
| Charge air system tester -VAG 1687- | No equivalent |
| Adapter -V.A.G 1687/10- | No equivalent |
| Adapters -V.A.G 1687/12- | No equivalent |
| wire repair kit -VAS 1978B- | No equivalent |
| Central diagnosis -VAS 505X-. | No equivalent |
| Diagnostic cable, 3 m -VAS 5051/5A- or diagnostic cable, 5 m -VAS 5051/6B- or diagnostic cable, 5 m -VAS 5052/3A- | No equivalent |
| Removal / installing device for valve cotters -VAS 5161- with guide plate -VAS 5161/23- and knurled spacer ring -VAS 5161/23-1- | No equivalent |
| Fuel drainage equipment -VAS 5190A- | No equivalent |
| Engine and gearbox jack -VAS 6095- | Support -T20172/1-, Tower -T20172/2-. See image of the tool or equipment → Chapter |
| Coolant charger -VAS 6096- | No equivalent |
| Workshop crane -VAS 6100- | No equivalent |
| Engine bung set -VAS 6122- | No equivalent |
| Tray -VAS 6208- | Drip tray -T20173- See image of the tool or equipment → Chapter |
| Manual vacuum pump -VAS 6213- | Pressure / vacuum pump -SAT 1390- see image for tool or unit → Chapter |
| Spring-type clip pliers -VAS 6340- | Pliers -T20174-. See image of the tool or equipment → Chapter |
| Pliers -VAS 6499- | Pliers -SAT 1105-. See image of the tool or equipment → Chapter |
| Temperature measuring device -VAS 6519- | Digital thermometer -SAT 4002- See image of the tool or equipment → Chapter |
| Drift -VW 207C- | Axle lever -T20061- See image of the tool or equipment → Chapter |
| Universal dial gauge bracket -VW 387- | Support -T20020-. See image of the tool or equipment → Chapter |
| attachment tool -VW 540- | Engine bracket -T20172/3-. See image of the tool or equipment → Chapter |
| attachment tool -2024A- | Support tool -T20127-. See image of the tool or equipment → Chapter |
| Dial gauge -VAS 6079- | No equivalent |
| Follower -3390- | No equivalent |
| Compression tester -VAG 1763- | No equivalent |
| Cylinder head clamping device -VAS 6419- | No equivalent |
| Special wrench, long reach -VAS 6543- | No equivalent |
| Pressure tester -VAS 6550- | No equivalent |
| T30 Allen key -T10405- | No equivalent |
| Adapter cable -V.A.G 1598/39- | No equivalent |
| Test box (105) Pins -VAG 1598/42- | No equivalent |
| Adapters -T10415- | No equivalent |
| Tool set -3253- | No equivalent |
| Ratchet spanner e/c 13. -T10384- | No equivalent |
| Tool set, 17mm -T10395- | Support tool -T20127-. See image of the tool or equipment → Chapter |
| Inside extractor -KUKKO 21/2- | No equivalent |
| Adjusting tool -3070- | Centring pin -T20049-. See image of the tool or equipment → Chapter |
| 4 mm wrench -T10370- | No equivalent |
| Extractor -T10392- | No equivalent |
| Bolt -T40204- | No equivalent |
| Ultrasonic tester -VAG 1842S- | No equivalent |
