Leon Mk2
| Fuel tank - assembly overview |
| 1 - | Sealing cap |
| q | Replace if damaged |
| 2 - | Securing bolt |
| 3 - | Earth connection |
| q | Check for secure seating. |
| 4 - | Bolt |
| q | Tightening torque: 10 Nm |
| 5 - | Cable duct |
| 6 - | Fuel tank |
| q | When removing, support with the engine and gearbox crane -V.A.G 1383 A- |
| q | removing and fitting → Chapter |
| 7 - | Bolt |
| q | replace |
| q | Tightening torque: 25 Nm |
| 8 - | Lock washer |
| 9 - | tension belt |
| q | Note fitting position: |
| 10 - | Protective plate |
| 11 - | Fuel filter: |
| q | Fitting position: The arrow indicates the direction of flow |
| 12 - | Supply pipe |
| q | Leads to the fuel distributor |
| q | Check for secure seating. |
| 13 - | Breather line |
| q | Clipped onto side of fuel tank |
| q | Check for secure seating. |
| 14 - | Oil seal |
| q | Replace if damaged |
| q | When installing, fit dry in fuel tank opening. |
| q | Moisten with fuel only when installing flange |
| 15 - | Fuel delivery unit |
| q | removing and fitting → Chapter |
| q | Checking fuel pump → Chapter. |
| q | Note fitting position on fuel tank → Fig. |
| q | With fuel level indicator sender -G- |
| q | Fuel level gauge sender -G-: removing and fitting → Chapter |
| q | Clean strainer if dirty |
| 16 - | Locking ring |
| q | Check for secure seating. |
| q | Tightening torque: 110 Nm |
| q | Removing and installing with the rotation tool -T10202- |
| 17 - | Supply pipe |
| q | Black |
| q | Clipped onto side of fuel tank |
| q | Check for secure seating. |
| 18 - | Return pipe |
| q | Blue colour |
| q | Clipped onto side of fuel tank |
| q | Check for secure seating. |
| 19 - | Filler cap set |
| q | With dustguard |
| q | Removing and installing → General body repairs, exterior; Rep. gr.55. |
|
|
