Leon Mk2
Assembly overview - air filter |
1 - | Air filter housing (upper section) |
2 - | Bolt |
q | Tightening torque: 8 Nm |
3 - | Bolt |
q | Tightening torque: 8 Nm |
4 - | Support |
5 - | Filter element |
q | Always use a genuine spare part air filter element |
q | removing and fitting → Chapter |
q | Heed replacement intervals → Booklet101 |
6 - | Bonded rubber bush, 8 Nm |
q | With safety screw |
7 - | Waterproof strips |
q | Replace if damaged |
8 - | Air filter housing (lower section) |
q | removing and fitting → Chapter |
9 - | Rubber bearing |
10 - | Inlet connection |
q | With boot |
11 - | Bolt |
q | Tightening torque: 8 Nm |
12 - | Intake channel |
13 - | Bolt |
q | Tightening torque: 8 Nm |
14 - | Spring-type hose clip |
q | Removing and installing with the pliers -T20174- |
15 - | Suction line |
16 - | Vacuum hose |
q | Replace if damaged |
q | Coming from the camshaft housing |