seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Oil tray and oil pump - Assembly overview > < Removing and installing parts of lubrication system
Engine oil
Engine oil
Oil capacity
With oil filter 4.4 l
Without oil filter 3.8 l.
Engine oil specifications
Use engine oils which comply with standard VW 501 01, 502 00, 503 00 or 504 00 → Booklet301.
Pre-requisite for checking the oil level
l  Engine oil temperature: at least 60  C
l  The vehicle must be on an absolutely even surface.
l  Wait a few minutes after switching off the engine to allow the oil to flow back into the sump.
Checking the oil level: process
–  Pull out the oil dipstick, wipe off with a clean cloth and insert it again as far as it will go.
–  Pull out the dipstick again and read off the oil level.
   
Markings on oil dipstick:
a - Oil must not be replenished.
b - Oil may be topped up.
c - Oil must be replenished. It is sufficient if the oil level is somewhere in area -b- after topping up.
  A02-0018

Oil tray and oil pump - Assembly overview > < Removing and installing parts of lubrication system