seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Working on the cooling system > < Working on the fuel system

Leon Mk2

Procedure before opening high-pressure section of injection system
Procedure before opening high-pressure section of injection system
  WARNING
t  The injection system is sub-divided into a high pressure system (max. approx. 120 bar) and a low pressure system (approx. 6 bar).
t  The fuel pressure in the high-pressure section must be reduced to a residual pressure of approx. 6 bar prior to opening the system. Procedure → Chapter.
   

Working on the cooling system > < Working on the fuel system