SEAT Workshop Service and Repair Manuals > Leon Mk2 > Power unit | 4 cylinder Gasoline direct injection engine, 2.0 liter turbo 4V, mechanics | Exhaust turbocharger, G-charger | Exhaust turbocharger | Turbocharger pressure capsule: removing and installation

Turbocharger pressure capsule: removing and installation

removing

–	Replace turbocharger → Chapter.

–	Release the fastener -1- on the turbo-charger, above the rod.

–	Loosen the locknut -2-.

–	Remove the rod from the turbocharger -3-.

–	Remove the pressure capsule -1- from the turbocharger -arrows-.

Fitting

Installation is carried out in the reverse sequence; note the following:

–	Adjust the turbocharger pressure capsule → Chapter.

–	Fit the turbocharger → Chapter.

Tightening torques.

Part		Nm
Pressure capsule to turbocharger		10

SEAT Workshop Service and Repair Manuals