Leon Mk2
Ignition system: assembly overview |
1 - | Knock sensor I -G61- |
q | To disassemble, the thermostat housing must be disassembled → Chapter |
q | Gold plated contacts |
2 - | Knock sensor 2 -G66- |
q | To disassemble, the oil filter bracket must be disassembled → Chapter |
q | Gold plated contacts |
3 - | Ignition coil with output stage: -(N70, N127, N291, N292)- |
q | Removing and fitting → Chapter |
4 - | Spark plug, 25 Nm |
q | Type and spark gap → Chapter |
q | Remove and install with wrench -3122 B- . |
5 - | 20 Nm |
q | Tightening torque affects the knock sensor function |
6 - | 10 Nm |
7 - | Hall sender -G40- |
q | Gold plated contacts |
8 - | O-ring |