seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Check the supercharger air system for leaks (engine code BWA) > < General diagram of the exhaust gas turbocharger supercharger air system (engine code BWA)

Leon Mk2

Remove and install the supercharger air system (engine code BWA)
Remove and install the supercharger air system (engine code BWA)
t  Removing → Anchor
t  Installing → Anchor
Removing
–  Remove the radiator → Chapter.
  Note
In order to avoid damage to the condenser or the pipes/hoses of the refrigerant, avoid pulling, bending or twisting excessively.
  WARNING
The air conditioning refrigerant circuit must not be opened.
   
–  Unscrew bolts -arrows-. For this purpose, it is necessary to unhook the left and right air duct and pivot in the direction of the headlamp.
–  Tilt the upper edge of the charged air cooler slightly backward.
–  Unhook charged air cooler at bottom mounts. For this purpose, lift the charged air cooler.
–  Move the charged air cooler in the direction of the engine.
–  Support the lower side of the charged air cooler to prevent it from falling.
  A19-10368
–  Remove bolts -arrows-.
–  Detach the charge air cooler upwards and remove from below.
Installing
Installation is carried out in the reverse sequence; note the following:
l  Tightening torques → Chapter
–  Assembly of hose connections with couplings → Chapter.
–  Fit the lock carrier, → Bodywork, exterior fitting work; Rep. gr.50.
–  Fill up coolant → Chapter.
  A19-10274

Check the supercharger air system for leaks (engine code BWA) > < General diagram of the exhaust gas turbocharger supercharger air system (engine code BWA)