Leon Mk2
Supercharging air cooling: Assembly overview (engine codes BWJ, CDLA, CDLD) |
1 - | Bolt. |
q | 5 Nm |
2 - | Support |
q | For intercooler |
3 - | Charge air cooler |
q | Removing and installing → Chapter |
4 - | Hose clip |
5 - | Bolt. |
q | 10 Nm |
6 - | Charge air pipe |
q | Assembly of hose connections with couplings → Chapter |
7 - | Charge air hose |
q | Assembly of hose connections with couplings → Chapter |
8 - | Hose clip |
9 - | Towards the air duct |
q | See → Item |
10 - | Charge air hose |
q | To the throttle valve control unit -J338- |
11 - | Hose clip |
12 - | Charge air pipe |
13 - | Bolt. |
q | 10 Nm |
14 - | Hose clip |
15 - | Charge air hose |
16 - | Hose clip |
17 - | Seal |
q | Replace |
18 - | Charge air pressure sender -G31- |
19 - | Bolt. |
q | 5 Nm |
20 - | Bolt. |
q | 10 Nm |
21 - | Hose clip |
22 - | Flexible hose |
23 - | Hose clip |
24 - | Housing |
25 - | Turbocharger air recirculation valve -N249- |
q | Installation position → Fig. |
26 - | Bolt. |
q | 7 Nm |
27 - | Seal |
q | Replace |
28 - | Hose clip |
29 - | Flexible hose |
|