Leon Mk2
Engine cover / air filter cover: Assembly overview |
1 - | Air mass meter -G70- |
q | Replace gasket, observe correct installation position → Fig. |
q | Removing and installing |
2 - | 3 Nm |
3 - | Upper section of air filter/engine cover |
q | Clean the bottom part of the air filter from salt deposits, dirt and leaves. |
q | Observe removal instructions strictly (danger of breaking engine cover) |
4 - | Spring-type hose clip |
5 - | Intake air duct |
6 - | Filter element |
7 - | Air filter lower part |
q | Clean any salt residue, leaves and dirt out of air filter housing lower part |
8 - | 3 Nm |
9 - | Heat shield |
10 - | Rubber sleeve |
11 - | Suction hose |
q | Only for vehicles with engine code BWA |
12 - | Retaining clamps |
q | Only vehicles with engine codes BWJ, CDLD, CDLA |
13 - | Suction hose |
q | Only vehicles with engine codes BWJ, CDLD, CDLA |
|