seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Valve control > < Checking compression

Leon Mk2

Removing and installing exhauster pump
Removing and installing exhauster pump
Removing:
Proceed as follows:
–  Carefully remove engine cover → Chapter.
–  Remove air filter → Chapter.
–  Remove the high pressure pump using → Chapter.
   
–  Separate the pressure hose from the vacuum pump -1- and move it to one side.
–  Remove nut -2- and detach earth wire.
–  Lift the coolant pipe up and off.
  A15-10441
–  Remove bolts -arrows- and take off exhauster pump.
Installation
Installation is carried out in the reverse order.
  E47-10010

Valve control > < Checking compression