Leon Mk2
Note
|
| 1 - | Radiator/cooler |
| q | removing and installing → Chapter |
| q | Renew coolant after replacing |
| 2 - | Coolant hose |
| q | To turbocharger. |
| 3 - | Coolant hose |
| q | At top of the low-temperature cooler |
| 4 - | Coolant hose |
| q | To turbocharger. |
| 5 - | Coolant hose |
| q | To the charge-air cooler in the intake manifold |
| 6 - | Radiator fan -V7- and radiator fan 2 -V177- |
| q | With coolant fan control unit -J293- |
| q | According to versions |
| 7 - | Coolant hose |
| q | Coolant pipe below the intake manifold |
| 8 - | Coolant hose |
| q | To fuel radiator |
| 9 - | Expansion tank |
| q | Perform cooling system leakage check with cooling system tester -VAG 1274B- and the adaptor -VAG 1274/8- |
| 10 - | Electrical connector |
| 11 - | Cap |
| q | Check with cooling system tester -VAG 1274B- and adaptor -VAG 1274/9- |
| q | At a pressure of 1.4 ... 1.6 bars pressure release valve should open. |
| 12 - | 5 Nm |
| 13 - | Plastic inserts |
| q | For securing bolts. |
| 14 - | Support |
| 15 - | Coolant hose |
| q | At the coolant circulation pump -V50- |
| 16 - | Cowling |
| 17 - | 5 Nm |
| 18 - | 5 Nm |
| 19 - | Coolant hoses |
| q | Housing for the thermostat |
| 20 - | Coolant hose |
| q | To heat exchanger for heater unit |
| 21 - | Connection |
| q | At top of radiator |
| 22 - | Connection |
| q | At bottom of radiator |
| 23 - | Retaining clip |
| 24 - | Radiator outlet coolant temperature sender -G83- |
| 25 - | O-ring |
| q | renew if damaged |
| 26 - | Radiator mount |
| 27 - | Radiator mount |
| 28 - | 5 Nm |
