seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Oil sump: Removing and installing > < Assembly overview

Leon Mk2

oil level and oil temperature senderG266: Removing and installing
oil level and oil temperature sender -G266-: Removing and installing
t  Removing → Anchor
t  Installing → Anchor
   
Removing
l  Engine oil drained: (Altea, Altea XL, Leon) → Booklet101, (Ibiza) → Booklet601
–  Unplug electrical connector -3-.
–  Unscrew the nuts -1- and remove the oil level and oil temperature sender -G266--Pos. 4-.
Installing
Installation is carried out in the reverse sequence; note the following:
–  Tightening torques → Chapter
  Note
Replace the seal -2-.
–  Top up engine oil → Chapter.
  A17-0371

Oil sump: Removing and installing > < Assembly overview