SEAT Workshop Service and Repair Manuals

Engine assembly mountings Tightening torques   Note The fastening bolts of the engine assembly brackets are expandable bolts and must be replaced.

Assembly mountings

-A-1)	20 Nm + 90° (1/4 turn) further
-B-1)	30 Nm + 90° (1/4 turn) further
1) Renew bolts

Gearbox assembly mounting

-A-1)	40 Nm + 90° (1/4 turn) further
-B-1)	50 Nm + 90° (1/4 turn) further
-C-1)	50 Nm + 90° (1/4 turn) further
1) Renew bolts

Pendulum support   Note Position the bolts -A- in the oblong holes in the mounting, in such a way that the distance between the gearbox and the assembly transport is as great as possible.

-A-1)	30 Nm + 90° (1/4 turn) further
-B-1)	40 Nm + 90° (1/4 turn) further
1) Renew bolts